SH Scientific FFU 1170 Laminar Flow Fan Filter Unit for Mushroom Growers

Give Your Mushroom Lab a Dedicated Source of HEPA Filtered Air You’ve put time into preparing your grain, mixing substrate, and sterilizing your materials.

When it’s time to open a bag or work with an agar plate, the air around your work matters.

The SH Scientific FFU 1170 brings HEPA filtration and adjustable airflow to your mushroom lab. With remote controls and a stackable design, it offers a practical option for growers planning a dedicated area for culture work and inoculation.

Contact Mushroom Media Online to request a quote for your lab.

Put Air Filtration Where You Work A clean work surface is one part of your lab routine. Airborne particles are another concern when you’re handling exposed cultures or sterilized materials.

This fan filter unit moves air through a prefilter and a HEPA filter rated at 99.99% efficiency at 0.3 microns.

It gives growers a source of filtered air to incorporate into a properly arranged workspace. For agar work, culture transfers, and inoculation, combine filtered airflow with proper cleaning and handling.

Arrange your tools and materials so you can work within the filtered air without blocking its path. Adjust the Airflow Without Reaching Behind the Unit

Retail Pricing is $1,399 each
Order now to save hundreds of dollats per unit!

More discounts for multiple units.

We can ship up to 4 units per pallet to save you more. Save on each unit and the shipping cost.

The FFU 1170 features adjustable fan speed, a remote controller, and manual touch controls.

You can change settings with the remote instead of reaching behind the housing. That convenience matters when you’ve arranged your work area and want access to the controls without moving the equipment. The supplier also describes even air distribution across the filter surface, a useful feature when planning where to position your work. Construction Designed Around the Filter The steel housing holds the main filter in a sealed assembly. Protective grilles with an epoxy finish cover both the HEPA filter and the prefilter. You get an assembled filtration unit to incorporate into your lab layout, with controls for adjusting its operation.

Plan the Fit Before You Order The FFU 1170 is in the nominal 4 foot by 2 foot size category.

Its listed external dimensions are 1,175 mm long, 575 mm high, and 360 mm deep, or approximately 46.3 inches long, 22.6 inches high, and 14.2 inches deep.

The listed net weight is 68 pounds. With the bulk size of these units we must ship these on a pallet with a commercial shipper. We can ship up to 4 per pallet direct to your location.

Power consumption is 215 watts, the listed supply voltage is 110V, and the supplier gives an operating noise range of 50 to 60 decibels.

Use the external measurements when planning your support surface and available space. They describe the unit itself, rather than the dimensions of a finished workbench.

A Stackable Design for Your Lab Layout The manufacturer provides instructions for stacking two units and fastening them together with brackets and bolts. This gives growers another configuration to consider when planning their workspace.

Follow the manufacturer’s installation instructions for placement and assembly, and review the operating manual before use.

Request a Quote for Your Mushroom Lab

Ready to add a dedicated fan filter unit to your setup? Contact Mushroom Media Online about the SH Scientific FFU 1170.

Include the number of units you need, your delivery ZIP code, and any questions about your planned layout. Request your quote today and take the next step toward a lab arranged around the work you do.

Retail Pricing is $1,399 each
Order now to save hundreds of dollats per unit!

More discounts for multiple units.

We can ship up to 4 units per pallet to save you more. Save on each unit and the shipping cost.

How are FFUs shipped, and what are the pallet sizes and shipping weights?

Orders of one to four FFUs can ship on a pallet. Dimensions below are in inches, listed as length by width by height. Total shipping weights include a 44 pound pallet.

Units per pallet Pallet dimensions Total shipping weight
1 48 x 40 x 20 inches 116 pounds
2 48 x 40 x 30 inches 188 pounds
3 48 x 40 x 41 inches, height pending confirmation 260 pounds
4 48 x 40 x 52 inches 332 pounds
What can I use the FFU 1170 for in my mushroom lab?

The FFU 1170 supplies HEPA filtered air for a dedicated workspace used for tasks such as pouring agar plates, transferring cultures, and inoculation. Proper placement, clean tools, and careful handling remain essential when working with exposed cultures or sterilized materials.

What type of filtration does the FFU 1170 use?

The unit includes a prefilter and a HEPA filter rated at 99.99% efficiency at 0.3 microns. That rating describes the filter’s particle removal performance. It doesn’t mean the entire room is sterile or guarantee that every plate or bag will remain free of contamination.

Can I adjust the airflow?

Yes. The FFU 1170 has adjustable fan speed, a remote controller, and manual touch controls. The remote lets you change settings without reaching behind the unit, making adjustments easier once you’ve arranged your workspace.

How much space does one FFU require?

The listed external dimensions are approximately 46.3 inches long, 22.6 inches high, and 14.2 inches deep. The unit itself weighs 68 pounds. Plan for a sturdy support surface, room for your work, and clearance around the air intake. These measurements describe the equipment, not a finished workbench.

Can I stack two FFUs?

Yes. The manufacturer provides instructions for stacking two units and securing them together with brackets and bolts. Follow those instructions when planning and assembling your setup, and make sure the supporting surface can accommodate the combined weight. labandfurnace.com

One correction to your shipping figures: 288 pounds plus the 44 pound pallet equals 332 pounds. I used that calculated total and kept the three unit pallet height marked as pending confirmation.