Masters Mix

Learn more about Using the Fast Fruiting Mix

Discover some of the many ways you can use the Fast Fruiting Mix, also known as the Master’s Mix

Storing your Wheat Bran.

Wheat bran can be transferred into airtight containers and stored up to 30 days without refrigeration. It is ideal however to store your bran in containers then in your refrigerator. The reason for this is you want to assure two things.

The Wheat Bran does not get attacked by any bugs or other pests. Bugs love grains. Just like it is very nutritious for us bugs love it for the same reason. Many mushroom growers transfer their grain into mason jars once they receive their order. Keeping any unused portion sealed in an airtight container.

Secondly, you do not want the grains to go rancid. For mushroom growers limiting the chance of contamination is also critical. The reason you have chosen grains to work with is that other things love to grow in your grain. The key is keeping them safe until you are ready to use them. If ordering in bulk you should have a storage plan in place when you make your purchase. That way you are ready when your shipment arrives.

Presto 09985 Pressure Cooker Sealing Ring - Replacement

SKU 09985
$12.00
In stock
1
Product Details

The sealing ring fits around the inside rim of the cover and forms a pressure-tight seal between the cover and the body of the pressure canner during canning and cooking.

1. Remove the old sealing ring and the overpressure plug. (The overpressure plug is under the handle on some models.) CAUTION: To insure safe operation and satisfactory performance from your pressure cooker, replace the automatic air vent every time you replace the sealing ring, or sooner if it becomes hard or inflexible.
2. Clean the sealing ring groove and the air vent opening thoroughly. Be sure they are free of all food particles and foreign material.
3. Wash the new sealing ring in warm soapy water, rinse and dry. Install the sealing ring by working it into the cover a small section at a time until it is fully in place. Any excess amount of sealing ring can be worked into the cover in this manner.
4. If necessary, to help make the cover easier to open and close, a very light coating of cooking oil may be applied to the underside of the body lugs and sealing ring.
5. To install the overpressure plug. Push the round side of the rubber plug (marked TOP) into the opening from the underside of the cover.
6. When putting the cover on the body, press one hand down on the area opposite the handle. This will help compress the sealing ring and make the cover easy to lock in place. Then, open and close the cover several times to make it operate more freely.
Save this product for later
Mixed Pallet Orders