TROUBLE SHOOTING
“Preventing is better than solving the problems”
Or a penny of prevention is better than a pound of cure.
If your Mycelium fails to form.
I can me the following things.
Improper initiation strategy.
Consult parameter of growth. Alter moisture, temperature, light, carbon dioxide, etc.
Note: If the substrate is too moist, decrease moisture.
Chlorinated or contaminated water.
Use activated charcoal water filters to eliminate chemical contaminants or any other ways of simple or appropriate technology.
Bad substrate.
Check the substrate. Spread the substrate and remix the substrate, package again, make sure all raw materials are good and fresh.
Note: It is necessary to pasteurize immediately after bagging otherwise fermentation gas will slow down the rate of growth of mycelium or stop mycelium growth.
This is one of the reasons we recommend the Fast Fruiting Mix from MusheroomMediaOnline.com to avoid these kinds of issues.
Bad pasteurization or sterilization.
Check method of pasteurization. Release all air and make sure there is continuous steam before starting pasteurization for a period of 3 hours.
The substrate in the bag is too hot when inoculation
Make sure that the substrate bag is not too hot before inoculation. Let your bags properly cool after your sterilization efforts.
Bad strain or spawn.
Obtain younger strain of known vitality & history.
Spawn contaminated.
Pasteurize and inoculate again with good spawn. This happens and if you screen better with the previous stages it will happen less. If you do a solid job with the previous screening you may still have 3% with issues.
Forgot to inoculate the bag.
Make sure to inoculate. Kind of reminds me of troubleshooting a computer problem and forgetting to check to make sure the computer is plugged in and has power.
Poor spread of mycelium, bad smell, spots and mites.
Good pasteurization but must decrease the temperature in the pasteurization chamber. Pasteurization was too quick and/or the chamber door was opened too quickly.
Slowly decrease the temperature in the chamber. Do not open the cover of the chamber too quickly. Check that the cotton plug is tightly closed.
Inoculation process.
Inoculate in hygiene conditions; clean and with no air movement.
Too high density in the incubation area, not enough ventilation to decrease accumulated temperature.
Spread the substrate bag and make more air ventilation in the incubation area. Check temperature and control surroundings to maintain 25-35 degrees Celsius.
Too high carbon dioxide.
Not more than 5% carbon dioxide. Check ventilation. Remember mushrooms need fresh air just like you and me.
Hygiene of the incubation house.
Improve hygiene in the incubation house.
Mycelium develops in patches. Substrate is not evenly prepared and some parts have more nutrients than others.
Improve your substrate mixing efforts. If you are using the Fast Fruiting mix you should have no issues since the pellets comes premixed and you just need to add water, and mix.
Bacteria, other fungi contamination.
Check the process causing contamination. Separate contaminated bags as soon as possible. Remix substrate separately. Remake substrate bags and pasteurize for a longer time. Follow the process.
Mite contamination.
Immediately separate contaminated bags and pasteurize again. Continue the normal process.
Note:
*Keep hygiene management; make sure to clean everything (person, area, tools, equipment, and surroundings during every step.
*Stop using the area to cut the life cycle of all contaminants for a period of at least 1-2 weeks. For serious contamination cases, spray area with chemicals.
*Use black-light with water or sticky-trap to decrease insects.
Mycelium grows but fails to produce mushrooms.
Substrate formula is not suitable.
Adjust the formula; check pH; sawdust; additives; etc. Again, broken record here but you eliminate this issue with the fast fruiting mix.
Mites, mold, virus, bacteria and insects.
Check pasteurization process, inoculation, other processes and mushroom house management for hygiene.
Inhibited by environmental toxins.
Remove the source of toxins.
Bad strain or spawn
Get yourself a new strain or spawn.
Mushrooms form, but stems are long; caps underdeveloped.
Inadequate light.
Increase or adjust the light to the correct wavelength. One thing that helps with some breeds is opening holes in the grow bags from the side closest to the light source. If you are growing on racks then just as you would try and make sure a pant receives sunlight, you want to make sure your mushrooms get light as well.
Excessive carbon dioxide.
Increase air exchange, open doors or windows and close at the correct time.
Mushrooms produced only in the first flush, fail to produce subsequent flushes.
|
Inadequate substrate nutrition. |
It is time to review your substrate. The reason we make the Fast Fruiting mix at 50/50 soy hull and oak pellets it to assure that the substrate has abundant nutrition.
Competitors.
Check hygiene, adjust light, temperature, humidity, air and ventilation.
Bad strain.
Again, get your hands on another strain.
Canning Mushrooms
Canning Mushrooms How to can mushrooms at home for fun, preservation, and profit. When we talk about canning mushrooms in this case, we are talking about canning your mushrooms at home with a traditional canning method. 10 steps to can mushrooms. Source and choose...
Why does your mushroom substrate matter?
Why does the substrate matter? In a field like farming mushrooms where it is possible (at least in part) to literally grow with waste materials and manure, why does your substrate matter? A few things to look at with the cost of a substrate as you grow and...
Online Ordering For Mushroom Farms
Online Food Ordering Systems for Mushroom Farms A good number of Mushroom Farmers are looking for local delivery solutions. Each one is looking for Online Ordering For Mushroom Farms. They want an app or a feature on their website that allows customers to order fresh...
Masters Mix Preparation
A great video from Southwest Mushrooms on making your own masters mix with our ingredients. Several times during the video you can see our product label shown to the camera. Michael Crowe from Southwest Mushrooms has done it all. Here you can see how productive he is...
Growing Mushrooms at home for fun or profit.
Growing Mushrooms at home for fun or profit. How you grow your mushrooms ultimately is determined like anything else by your focus. By this I mean one person’s approach when growing them for their own use, should likely differ from the methods commercial farms use to...
Mushroom Growing Timelapse
This timelapse video of mushrooms growing in a tub seems peaceful and fun. If you want to learn more about growing your own mushrooms you can download 2 free ebooks here. You can also learn more with the content on this blog and from following our free business group...
Prepping your Grain Spawn
Liquid Culture Lids for Jars
Discover how to make your own liquid culture lids for your jars. These are great for making your own liquid culture. As shared in the video even a small jar can help you transform 1 LC syringe into 40. If you want to innoculate your own grain spawn LC is the way to...
Behind the scenes at Southwest Mushrooms
Above is a fun video that gives you a behind-the-scenes look at some of Mike's marketing efforts. He is making his business available, and visible sharing with others his passion for mushrooms. Mike has been interviewed by PBS, and even several well known regional...