TROUBLE SHOOTING

“Preventing is better than solving the problems”

Or a penny of prevention is better than a pound of cure.

If your Mycelium fails to form.

I can me the following things.

Improper initiation strategy.

Consult parameter of growth. Alter moisture, temperature, light, carbon dioxide, etc.

Note: If the substrate is too moist, decrease moisture.

Chlorinated or contaminated water.

Use activated charcoal water filters to eliminate chemical contaminants or any other ways of simple or appropriate technology. 

Bad substrate.

Check the substrate. Spread the substrate and remix the substrate, package again, make sure all raw materials are good and fresh.

Note: It is necessary to pasteurize immediately after bagging otherwise fermentation gas will slow down the rate of growth of mycelium or stop mycelium growth.

This is one of the reasons we recommend the Fast Fruiting Mix from MusheroomMediaOnline.com to avoid these kinds of issues.

Bad pasteurization or sterilization.

Check method of pasteurization. Release all air and make sure there is continuous steam before starting pasteurization for a period of 3 hours. 

The substrate in the bag is too hot when inoculation

Make sure that the substrate bag is not too hot before inoculation. Let your bags properly cool after your sterilization efforts.

Bad strain or spawn.

Obtain younger strain of known vitality & history. 

Spawn contaminated.

Pasteurize and inoculate again with good spawn. This happens and if you screen better with the previous stages it will happen less. If you do a solid job with the previous screening you may still have 3% with issues.

Forgot to inoculate the bag. 

Make sure to inoculate. Kind of reminds me of troubleshooting a computer problem and forgetting to check to make sure the computer is plugged in and has power.

Poor spread of mycelium, bad smell, spots and mites.

Good pasteurization but must decrease the temperature in the pasteurization chamber. Pasteurization was too quick and/or the chamber door was opened too quickly. 

Slowly decrease the temperature in the chamber. Do not open the cover of the chamber too quickly. Check that the cotton plug is tightly closed.

Inoculation process.

Inoculate in hygiene conditions; clean and with no air movement.

Too high density in the incubation area, not enough ventilation to decrease accumulated temperature. 

Spread the substrate bag and make more air ventilation in the incubation area. Check temperature and control surroundings to maintain 25-35 degrees Celsius. 

Too high carbon dioxide. 

Not more than 5% carbon dioxide. Check ventilation. Remember mushrooms need fresh air just like you and me.

Hygiene of the incubation house. 

Improve hygiene in the incubation house.

Mycelium develops in patches. Substrate is not evenly prepared and some parts have more nutrients than others. 

Improve your substrate mixing efforts. If you are using the Fast Fruiting mix you should have no issues since the pellets comes premixed and you just need to add water, and mix.

Bacteria, other fungi contamination.

Check the process causing contamination. Separate contaminated bags as soon as possible. Remix substrate separately. Remake substrate bags and pasteurize for a longer time. Follow the process. 

Mite contamination.

Immediately separate contaminated bags and pasteurize again. Continue the normal process.

Note:

*Keep hygiene management; make sure to clean everything (person, area, tools, equipment, and surroundings during every step.

*Stop using the area to cut the life cycle of all contaminants for a period of at least 1-2 weeks. For serious contamination cases, spray area with chemicals.

*Use black-light with water or sticky-trap to decrease insects.

 

Mycelium grows but fails to produce mushrooms.

Substrate formula is not suitable.

Adjust the formula; check pH; sawdust; additives; etc. Again, broken record here but you eliminate this issue with the fast fruiting mix.

Mites, mold, virus, bacteria and insects.

Check pasteurization process, inoculation, other processes and mushroom house management for hygiene. 

Inhibited by environmental toxins. 

Remove the source of toxins.

Bad strain or spawn

Get yourself a new strain or spawn.

Mushrooms form, but stems are long; caps underdeveloped.

Inadequate light.

Increase or adjust the light to the correct wavelength. One thing that helps with some breeds is opening holes in the grow bags from the side closest to the light source. If you are growing on racks then just as you would try and make sure a pant receives sunlight, you want to make sure your mushrooms get light as well.

Excessive carbon dioxide.

Increase air exchange, open doors or windows and close at the correct time.

Mushrooms produced only in the first flush, fail to produce subsequent flushes.

 

Inadequate substrate nutrition.

It is time to review your substrate. The reason we make the Fast Fruiting mix at 50/50 soy hull and oak pellets it to assure that the substrate has abundant nutrition.

Competitors.

Check hygiene, adjust light, temperature, humidity, air and ventilation. 

Bad strain.

Again, get your hands on another strain.

Partnering with a local chef and restaurant

Partnering with a local chef and restaurant

Partnering with a local chef and restaurant can be an excellent strategy for gourmet mushroom farmers to promote and sell their mushrooms. Here is a detailed guide on how to establish and nurture this partnership, enhancing both your business and the restaurant's...

Harnessing Local Climates for Gourmet Mushroom Cultivation

Harnessing Local Climates for Gourmet Mushroom Cultivation

Gourmet mushroom cultivation is amazing, mushrooms with their diverse flavors and textures, offer a unique opportunity for local growers to tap into a profitable niche market. Understanding and utilizing your local climate is key to successfully cultivating these...

Growing Oyster Mushrooms

Growing Oyster Mushrooms

Growing oyster mushrooms at home is both rewarding and straightforward, making it a perfect project for beginners. These mushrooms are known for their delicate flavor and versatility in dishes. This guide will delve into the essential steps and best practices to...

Starting Your Gourmet Mushroom Farm: A Step-by-Step Guide

Starting Your Gourmet Mushroom Farm: A Step-by-Step Guide

Starting Your Gourmet Mushroom Farm can be an exciting venture for anyone passionate about sustainable agriculture and local food systems. Mushrooms are not only a culinary delight but also offer considerable health benefits, making them a popular choice for consumers. Here’s a comprehensive guide to help you establish a mushroom farm, focusing on the crucial steps from location selection to maintaining a sterile environment.

Selling Your Spent Mushroom Substrate to Gardeners

Selling Your Spent Mushroom Substrate to Gardeners

A High-Value Soil Supplement Mushroom cultivation is not only a rewarding hobby but also offers an excellent opportunity for sustainability through repurposing spent substrate. As you delve into the world of mushrooms, you quickly learn that the substrate, the...