TROUBLE SHOOTING
“Preventing is better than solving the problems”
Or a penny of prevention is better than a pound of cure.
If your Mycelium fails to form.
I can me the following things.
Improper initiation strategy.
Consult parameter of growth. Alter moisture, temperature, light, carbon dioxide, etc.
Note: If the substrate is too moist, decrease moisture.
Chlorinated or contaminated water.
Use activated charcoal water filters to eliminate chemical contaminants or any other ways of simple or appropriate technology.
Bad substrate.
Check the substrate. Spread the substrate and remix the substrate, package again, make sure all raw materials are good and fresh.
Note: It is necessary to pasteurize immediately after bagging otherwise fermentation gas will slow down the rate of growth of mycelium or stop mycelium growth.
This is one of the reasons we recommend the Fast Fruiting Mix from MusheroomMediaOnline.com to avoid these kinds of issues.
Bad pasteurization or sterilization.
Check method of pasteurization. Release all air and make sure there is continuous steam before starting pasteurization for a period of 3 hours.
The substrate in the bag is too hot when inoculation
Make sure that the substrate bag is not too hot before inoculation. Let your bags properly cool after your sterilization efforts.
Bad strain or spawn.
Obtain younger strain of known vitality & history.
Spawn contaminated.
Pasteurize and inoculate again with good spawn. This happens and if you screen better with the previous stages it will happen less. If you do a solid job with the previous screening you may still have 3% with issues.
Forgot to inoculate the bag.
Make sure to inoculate. Kind of reminds me of troubleshooting a computer problem and forgetting to check to make sure the computer is plugged in and has power.
Poor spread of mycelium, bad smell, spots and mites.
Good pasteurization but must decrease the temperature in the pasteurization chamber. Pasteurization was too quick and/or the chamber door was opened too quickly.
Slowly decrease the temperature in the chamber. Do not open the cover of the chamber too quickly. Check that the cotton plug is tightly closed.
Inoculation process.
Inoculate in hygiene conditions; clean and with no air movement.
Too high density in the incubation area, not enough ventilation to decrease accumulated temperature.
Spread the substrate bag and make more air ventilation in the incubation area. Check temperature and control surroundings to maintain 25-35 degrees Celsius.
Too high carbon dioxide.
Not more than 5% carbon dioxide. Check ventilation. Remember mushrooms need fresh air just like you and me.
Hygiene of the incubation house.
Improve hygiene in the incubation house.
Mycelium develops in patches. Substrate is not evenly prepared and some parts have more nutrients than others.
Improve your substrate mixing efforts. If you are using the Fast Fruiting mix you should have no issues since the pellets comes premixed and you just need to add water, and mix.
Bacteria, other fungi contamination.
Check the process causing contamination. Separate contaminated bags as soon as possible. Remix substrate separately. Remake substrate bags and pasteurize for a longer time. Follow the process.
Mite contamination.
Immediately separate contaminated bags and pasteurize again. Continue the normal process.
Note:
*Keep hygiene management; make sure to clean everything (person, area, tools, equipment, and surroundings during every step.
*Stop using the area to cut the life cycle of all contaminants for a period of at least 1-2 weeks. For serious contamination cases, spray area with chemicals.
*Use black-light with water or sticky-trap to decrease insects.
Mycelium grows but fails to produce mushrooms.
Substrate formula is not suitable.
Adjust the formula; check pH; sawdust; additives; etc. Again, broken record here but you eliminate this issue with the fast fruiting mix.
Mites, mold, virus, bacteria and insects.
Check pasteurization process, inoculation, other processes and mushroom house management for hygiene.
Inhibited by environmental toxins.
Remove the source of toxins.
Bad strain or spawn
Get yourself a new strain or spawn.
Mushrooms form, but stems are long; caps underdeveloped.
Inadequate light.
Increase or adjust the light to the correct wavelength. One thing that helps with some breeds is opening holes in the grow bags from the side closest to the light source. If you are growing on racks then just as you would try and make sure a pant receives sunlight, you want to make sure your mushrooms get light as well.
Excessive carbon dioxide.
Increase air exchange, open doors or windows and close at the correct time.
Mushrooms produced only in the first flush, fail to produce subsequent flushes.
Inadequate substrate nutrition. |
It is time to review your substrate. The reason we make the Fast Fruiting mix at 50/50 soy hull and oak pellets it to assure that the substrate has abundant nutrition.
Competitors.
Check hygiene, adjust light, temperature, humidity, air and ventilation.
Bad strain.
Again, get your hands on another strain.
Government Grants for Farmers: Supporting Agriculture and Fostering Growth
Government grants play a crucial role in supporting farmers and agricultural projects by providing free financing options to farmers and ranchers. These grants are designed to assist in various aspects of farming operations and have a significant impact on the agricultural sector as a whole. There are different types of government grants available to farmers, each serving specific purposes and addressing different needs. The availability of these grants has a positive influence on sustainable agriculture, innovation, and the growth of the farming community.
Lions Mane Sales and Yields
Lions Mane Sales and Yields. Discover all of the details of mushroom yields and sales prices per pound.
Lions Mane Mushroom Growing
Lions Mane Mushroom Growing all you need and want to know about growing this amazing mushroom for profit or fun.
Growing Oyster Mushrooms
Step-by-Step: Growing Oyster Mushrooms Are you interested in growing your own oyster mushrooms but don't know where to start? Look no further! In this step-by-step guide, we will teach you everything you need to know to get started with growing oyster mushrooms. From...
How to Start a Mushroom Farm: Tips and Tricks
Mushroom Farming for Beginners: Tips and Tricks Are you considering mushroom farming as a beginner, but not sure where to start? Mushroom farming is a lucrative business that can provide you with sustainable income. Before starting your mushroom farm, it's important...
Growing Mushrooms for Profit: A Beginner’s Guide
Profitable Mushroom Growing: A Beginner's Guide Mushroom cultivation has been gaining popularity as a profitable business. It is a venture that requires minimal investment but has the potential for high returns. But where do you start? In this beginner's guide, we'll...
Make a living growing Mushrooms
Make a living growing Mushrooms. A financial look behind the scenes on a successful mushroom farm from our friends at Mossy Creek. This is an important look few ever get before getting their feet wet in mushroom farming. Imagine being able to see the financials of a...
Sterilize Grain with a Pressure Cooker
Sterilize Grain with a Pressure Cooker. Discover how to sterilize your grain spawn bags with a pressure cooker for growing mushrooms.
Understand Unicorn Bags
Understand Unicorn Bags offers a video from an industry leader. This is intended to help everyone understand the different bags Unicorn offers.